Hitachi SH-G1000 - Manual (Page 92)

Section 2: Understanding Your Device
84 2C: Controlling the Phone Function’s Settings
Changing the Others Settings
You can select various settings for other phone functions using the
Others tab.
1. Tap , then Settings . On the Personal tab, tap Phone , then the
Others tab on the bottom.
2. Make selections for each item.
ᮣ 4 or 5 digits dial
This function allows you to dial a number using only four or five digits,
either by programming a number to automatically be added to the
entered digits or by searching the Contacts directory for a phone number
containing the entered digits.
Abbreviate: Check the box to add a programmed number to the
beginning of an entered number. For Prefix, enter a number to be
added.
Contact match: Check the box to search the Contact directory for
phone numbers whose lower digits match the entered number.
ᮣ On battery power: Check the box to darken the screen during
conversations.
Tip: The screen will be automatically darkened when conversations are
continued for 60 seconds. When the screen is off, pressing the POWER,
TALK buttons, or operating the jog-wheel turns the screen on.
ᮣ Answer
This function allows you to select settings for answering incoming calls.
Any key answer: When Any-key answer is checked, incoming calls
can be answered by pressing any key other than the END, Power, Key
Guard buttons, Environment switch and Shift, Num, Fn keys on the
QWERTY keyboard. However, this function isn’t enabled in the Key
Guard state.
Auto Answer: When Auto Answer is checked, incoming calls can be
answered after nine seconds. The entered end key becomes invalid.