Hitachi SH-G1000 - Manual (Page 81)

Section 2: Understanding Your Device
73 2B: Using Your Phone
Making and Answering Calls
Making Calls
Your PCS Phone offers many different ways to make calls, including
PCS Voice Command
SM (page 203), using Contacts (page 74), Speed
Dialing (page 75), and using Call History (page 109).
To make a call using your keypad:
1. Make sure the phone is on. See page 72 for details.
2. Press
T to access the dialer screen.
3. Enter a phone number. If you make a mistake while dialing, tap
B to erase one digit at a time. To erase the entire number, tap
E, tap and hold B, or tap
Edit and Clear .
4. Tap
T to dial the number.
5. When you’re finished, tap
E to disconnect the call.
Tip: To redial your last outgoing call, tap
T.
Tip: When making calls off the Sprint Nationwide PCS Network, always
dial using 11 digits (1 + area code + phone number).
Answering Calls
1. Make sure the phone is on.
2. When a call comes in, tap Answer .
Depending on your settings, your PCS Phone notifies you of incoming
calls in the following ways:
ᮣ The device rings or vibrates.
ᮣ The screen displays an incoming bubble message.
ᮣ If available, the phone number of the caller is displayed.
ᮣ If the phone number is in the Pocket Outlook ® Contacts list, the list
entry’s name is displayed.