Hitachi SH-G1000 - Manual (Page 191)

Section 2: Understanding Your Device
183 2L: Backing Up Data
Note: When backing up data using the same medium again, specify the
same folder name. If you select a folder not generated for backing up, all
data in the folder will be lost.
Note: If you check the box for Use Password, backed up data cannot be
restored unless a correct password is entered. A password can be
composed of 1 to 8 digits. You can enter A to Z, a to z, and 0 to 9.
5. After a confirmation message appears, tap Yes to start data backup.
Note: Do not operate the device until backup is completed.
Tip: To conserve battery strength, it is recommended to use the AC
adapter when executing data backup.
Note: Use a memory card that has about twice as much capacity as the
in-use area size of the data storage area.
Restoration Procedure
1. Initialize the device. For the initialization method, see “Initialization”
on page 26.
2. Insert a memory card containing backup data into the device, and
then switch the device on.
3. Tap , Programs , and Data Backup .
4. Select Restore , then tap Next .