Hitachi SH-G1000 - Manual (Page 53)

Section 2: Understanding Your Device
45 2A: Your PCS Phone – The Basics
Initial Setup
When the device is switched on for the first time after purchase or after
the device is initialized, the following screen appears. Perform initial
setup procedures according to the on-screen instructions.
1. Tap anywhere on the screen.
2. The Align screen appears for touch screen alignment.
ᮣ Tap the center of the cross marker. Each time you tap the center of the
marker, the marker moves. When the center of the marker is tapped
five times, the alignment is completed and the Stylus screen appears.
3. Read the descriptions of the methods for using the stylus, then tap
Next . The screen for practicing pop-up menu operations appears.
4. Following the instructions, open a pop-up menu and perform
cut-and-paste operations. After finishing the paste operation, tap
Next .
The Location screen appears.
5. Specify a location on the Location screen.
ᮣ Tapping (shown to the right of the Time zone box) causes a list to be
displayed. As necessary, change the time zone where the device is to be
used and then tap
Next . The Complete screen appears.
6. Tap the Complete screen. The Today screen appears and the device is
ready for use.