5 motion sensor ms-100 (option), 1 mounting considerations, 2 mounting procedure – Furuno SEARCHLIGHT CH-250 User Manual

Page 32

Advertising
background image

22

1.5

Motion Sensor MS-100 (option)

The MS-100 measures ship’s pitching and rolling angles with sensor using the principles of the
gyroscope. The MS-100 is free from error caused by ship’s vertical and horizontal motion.
Therefore, it can be installed at any convenient location. However, ship’s semi-permanent
inclination due to loading imbalance cannot be detected. Compensate for this as described in
Chapter 3.

1.5.1 Mounting

considerations

•

Vibration in the mounting area should be minimal.

•

Locate the unit away from areas subject to water splash.

•

The ambient temperature should not exceed 50

°

C

1.5.2 Mounting

procedure

Orient the FORE mark on the unit toward the ship’s bow and mount the unit level to within 5

°

in

all direction. For the offset, see Chapter 3.

FORE

AFT

θ ≤ 5°

Advertising