Furuno SEARCHLIGHT CH-250 - Manual (Page 45)

35
RANGE-SONAR MODE
RANGE-VERTICAL MODE
RANGE-E/S MODE
ADJ MOTION SENSOR
TX FREQ ADJUST
TEST
TEST PATTERN
DEMO MODE
DEFAULT
: SELECT : MENU DISPLAY MENU: END
SYSTEM SETTING :
COLOR PALETTE
LANGUAGE
SYSTEM BACKUP
LOAD BACKUP DATA
HEADING OFFSET, DRAFT OFFSET
** SYSTEM MENU **
RANGE-TRACK MODE
System menu
6. Press the [] to select HEADING OFFSET, DRAFT OFFSET, and then press the [] to
display the heading offset display.
0 ˚ (-180˚ - +180˚) HEADING :
: CHANGE MENU: END
** HEADING OFFSET/DRAFT OFFSET **
0.0 ˚ (0.0 - 60.0m) DRAFT :
: SELECT
Head offset display
7. Press the [] [] to align heading (1 step) so that the target on heading direction appears
at the twelve o’clock position.
8. Press the [] to choose draft.
9. Press the [] [] to set ship’s draft.
10. Press the [MENU] key several times to close the menu.
11. Confirm that the target on heading direction appears at the twelve o’clock position.
Soundome setting Confirmation
Set the serial number for the soundome connected, under nine-999 or over 1000.
1. Open the SYSTEM MENU following step 1 to 4 in the above.
2. Select SYSTEM SETTING, and then press the [] to open the SYSTEM SETTING 1 menu.