Furuno SEARCHLIGHT CH-250 - Manual (Page 40)

30
2.4 Interface Unit
Earth NAV
Control
unit
cable
06S4079
VGA
monitor
Monitor unit
cable
06S4078
Transceiver unit cable
06S4078
Connect to ship's earth.
DATA/VIDEO IN DATA/VIDEO OUT RGB OUT
CONT NMEA
The blackbox type is required to connect a standard VGA monitor via the interface unit IF-8000.
Supply monitor and interconnection cable (Max. length 15 m with Dsub-15P connectors of male,
three rows of 15 pins) locally. The monitor used should satisfy the specifications shown below.
•
VGA type
•
ANALOG RGB 0.7 Vpp, positive polarity
•
TLL level H, V, Negative polarity
Note: Cut and remove the rubber covers as below to attach connectors to the interface unit..
Cut and remove
the covers.
Remove the
fixing metals.
Note: Connect control unit or navigator equipment to either interface unit or monitor unit
(supplied by FURUNO).