Fisher DC-TS960WL - Manual (Page 27)

GB-14 [ENGLISH]
Programmed playback [VCD] [CD]
It is possible to select tracks and play them in the desired order. Up to 32
selections can be programmed.
Note:
For VCD: If “PBC” appears on the FL display, press the
n button twice to
turn the indication off.
1. Press the PROG button in the stop mode.
The “PROGRAM” screen appears on the TV screen.
“PGM” blinks on the FL display.
2. Select the desired track number with the Number buttons.
Example: To select Track No.21, press “2” and then “1”.
To select Track No.3, press “3”.
- To make a correction during programming, select the track
number again by pressing the Number buttons.
- It is also possible to select the track number with the 4 / 5 button.
3. Press the ENTER button.
The next programme number is selected.
4. Repeat steps 2 and 3 to select tracks in the desired order.
To cancel the programming, press the PROG button.
5. Press the a (Play) button while the “PROGRAM” screen is displayed.
“PGM” remains lit on the FL display, and the selected tracks are
played back in the programmed order.
Note:
-
Because the programme is retained unless the disc tray is opened/
closed, it is possible to play back the programme after stopping it.
Selecting normal playback or programmed playback
[VCD] [CD]
Normal playback
Press the
a (Play) button.
Programmed playback
Press the PROG button to display the “PROGRAM” screen and then press
the
a (Play) button.
Changing the programme [VCD] [CD]
1. Press the PROG button in the stop mode.
The “PROGRAM” screen appears on the TV screen.
2. Select “PROGRAM No.” by pressing the b / a button.
3. Select the number of the programme you want to change by pressing
the
4 / 5 button.
4. Select “Track” by pressing the b / a button.
5. Select the desired track number with the Number buttons.
6. Press the ENTER button.
All Clear
PROGRAM
Clear No. 1 Track 3
No. : Tr.
1 : – –
2 : – –
3 : – –
4 : – –
5 : – –
6 : – –
7 : – –
8 : – –
No. : Tr.
9 : – –
10 : – –
11 : – –
12 : – –
13 : – –
14 : – –
15 : – –
16 : – –
No. : Tr.
17 : – –
18 : – –
19 : – –
20 : – –
21 : – –
22 : – –
23 : – –
24 : – –
No. : Tr.
25 : – –
26 : – –
27 : – –
28 : – –
29 : – –
30 : – –
31 : – –
32 : – –
Clearing the programme [VCD] [CD]
To clear all the programmes
1.
Press the PROG button in the stop mode.
The “PROGRAM” screen appears on the TV screen.
2. Select “All Clear” by pressing the b / a button.
3. Press the ENTER button.
All the programmes are cleared.
4. Press the PROG button.
The “PROGRAM” screen disappears.
To clear programmes one by one
1.
Press the PROG button in the stop mode.
The “PROGRAM” screen appears on the TV screen.
2. Select “PROGRAM No.” by pressing the b / a button.
3. Select the number of the programme you want to clear by pressing the
4 / 5 button.
4. Select “Clear” by pressing the b / a button.
5. Press the ENTER button.
The selected programme is cleared, and the next programme
advances.
6. Repeat steps 2 to 5.
7. Press the PROG button.
The “PROGRAM” screen disappears.
Repeat playback of programme [VCD] [CD]
Press the REPEAT button during programmed playback to select a repeat
mode.
TV screen (FL display): Operation
TRACK (REPEAT 1): Repeat of programmed track being played
back
PROGRAM (REPEAT ALL): Repeat of all programmed tracks
OFF (None): Normal playback mode
Note:
-
When the CLEAR button is pressed during programmed playback,
“OFF” appears on the TV screen and programmed playback is
stopped to return to normal playback. However the programme is not
cleared.
- When the disc tray is opened/closed, the programme is cleared.
- If the CLEAR button is pressed during programme-repeat playback,
the repeat function is cancelled.