Fisher DC-TS960WL - Manual (Page 39)

GB-26 [ENGLISH]
OPERATING THE TV WITH THE REMOTE
CONTROL OF THIS UNIT
It becomes possible to operate your TV with the remote control of this unit
by entering the maker code of the TV.
If the maker code is not listed, this operation is not possible. Even if the
maker code is listed, this operation may not be possible depending on the
model.
To set the remote control code for TV
To enter the remote control code for your brand of TV, follow the steps
below.
1. In the chart below, find the code corresponding to your brand of TV.
TV brands Code
Blaupunkt 071
Grundig 071, 072, 076, 105, 106, 146, 171
Hitachi 006, 007, 028, 047, 058, 064, 075, 077, 078, 079,
080, 082, 124, 126, 127, 134, 145, 159
ITT 028, 059, 083, 107, 128, 138, 162, 168
JVC 019, 023, 024, 025, 042, 058, 060, 065, 073, 136
LG 006, 063, 074, 075, 112, 121, 134, 145, 150, 151,
161, 171
Loewe 029, 074, 084
Mitsui 058, 059, 060, 061, 062, 063, 064, 071, 076, 086,
087, 089, 090, 091, 092, 122, 132, 134, 137, 178
Mitsubishi 006, 018, 045, 121, 161
Nokia 025, 028, 031, 059, 097, 128, 138, 139, 140, 162, 168
Panasonic 004, 016, 028, 043, 044, 098, 099
Philips 046, 078, 097, 100, 126, 163
Pioneer 052, 119, 167, 169, 179
Saba 028, 061, 126, 129, 134, 135, 141
Samsung 006, 020, 033, 034, 035, 046, 059, 063, 067, 068,
074, 112, 114, 121, 142, 144, 145, 154, 161
Sanyo 001, 002, 003, 022, 029, 058, 059, 118, 125, 131,
172, 173
Sharp 005, 017, 051, 058, 089, 130
Sony 015, 050, 103, 117
Telefunken 049, 145, 155, 156, 160
Thomson 026, 061, 070, 110, 126, 129, 135, 141, 156, 157
Toshiba 008, 048, 058, 062, 072, 103, 104, 118, 123, 158, 167
2. While holding down the TV POWER button, enter the 3-digit code
using the number buttons and press the ENTER button.
3. Release the TV POWER button.
The remote control is now set to operate your TV.
To use the remote control for TV
Press the desired function button (TV POWER, – TV CH +, TV/VIDEO, –
TV VOL +).
-
When using the remote control, the remote control must be pointed
toward your TV.
Note:
-
There may be some TV models that cannot be operated with this
remote control. If this is the case, use the original remote control
supplied with the TV.
IMPORTANT NOTE:
If the batteries in the remote control are changed, the code settings
for the TV must be re-entered.
Write your code number below for future reference.
TV:
CLEANING THE UNIT
Clean the outside of the unit with a clean soft cloth moistened with
lukewarm water. Do not use benzene, thinner or alcohol since they will mar
the finish of the surfaces.