Furuno INMARSAT-C MOBILE EARTH STATION FELCOM 12 - Manual (Page 107)

4-21
3) display log
The Display Log shows message number, priority, date and time of
transmission, LES ID and file size (in bytes) of the latest 50 received
and transmitted messages.
4) printing
Printing of a message begins (except messages with passwords) as
soon as it is received.
5) saving and filing
The DTE saves and files a receive message to the Display Message
List. (For installations with both a main and a 2nd DTE, you may
select where to store receive messages, on the system setup menu.)
The Display Message List shows the following:
Receive message no.
LES ID
Priority
File size (in bytes)
Message classification
Password for confidential messages
Date and time of transmission
Status
Setting the receive alarm
An audible alarm may be set to ring when a routine message is re-
ceived. The factory setting is OFF.
1. Press [F8] to display the Setup menu.
2. Press [6] to display the Auto Mode Setup.
Setup
7. E-Mail Setup
8. Directories
9. Configuration
Auto Mode Setup
OFF
ON
ON
OFF
ON Auto Log Print
Receive Alarm
Auto Telex Msg Save
Auto EGC Msg Save
Data Report & Polling Print
Figure 4-28 Auto mode setup menu
3. Press [
/
] to send the cursor to the Receive Alarm line.
4. Press [Enter] to open the selection window.
5. To enable the alarm, select ON. The alarm will be released for
one second when a message is received.