Furuno INMARSAT-C MOBILE EARTH STATION FELCOM 12 - Manual (Page 123)

5-5
14. Press [Enter] to close the station list.
15. Press [
↓
] to place the cursor on the LES ID line.
16. Press [Enter] to display the LES list.
17. Select LES.
18. Press [Enter] to close the LES list.
Note: If the item "Activation" below is set to "Daily", do the
following steps:
1)Press [
↓
] several times to select Report Times.
2)Press the [Enter] key to show the screen for entry of trans
mission quantity.
3) Press the [0] key or [Backspace] key to set No Limit.
4) Press the [Enter] key to close the screen.
19. Press [
↓
].
20. Press [Enter] to open the selection window.
21. Select “Regular Interval” or “Daily”.
22. Press [Enter] to close the selection window.
23. Press [
↓
].
` When “Regular Interval” is selected on step 21,
(1) Press [Enter] to open the window for interval time entry.
(2) Key in the interval time.
(3) Press [Enter] to close the window.
(4) Press [
↓
].
(5) Press [Enter] to open the window for report times entry.
(6) Key in the report times or select “No Limit”.
(7) Press [Enter] to close the window.
` When “Daily” is selected on step 21,
(1) Press [Enter] to open the window for start time entry.
(2) Key in the start time.
(3) Press [Enter] to close the window.
(4) Press [
↓
].
(5) If necessary, key in the start time of Start Times 2-4.
24. Press [
↓
].
25. Press [Enter] to open the selection window.
26. Press [
↑
] or [
↓
] select the contents of message report.
NAV: Position, speed, bearing
NAV+SEAINF: Position, speed, bearing, water temperature,
current, depth