Furuno INMARSAT-C MOBILE EARTH STATION FELCOM 12 - Manual (Page 37)

1-13
File Edit Transmit EGC Reports Logs Options Setup Position StopAlarm
Current State: IDLE
DCE Ver **
SYNC ( NCS )
NCS: IOR LOGOUT 97-08-04 01:42 (UTC)
Setup
1. Distress Alert Setup
2. System Setup
3. Editor Setup
4. Terminal Setup
5. EGC Setup
6. Auto Mode Setup
7. E-Mail Setup
8. Directories
9. Configuration
Figure 1-12 Setup menu
2. Press [6] to display the Auto Mode Setup menu.
3. Press [
/
] key to go to the Receive Alarm line.
4. Press [Enter] to open the selection window.
Setup
7. E-Mail Setup
8. Directories
9. Configuration
Auto Mode Setup
OFF
ON
ON
OFF
ON Auto Log Print
Receive Alarm
Auto Telex Msg Save
Auto EGC Msg Save
Data Report & Polling Print
ON
OFF
Figure 1-13 Auto mode setup menu
5. Press [
/
] to select OFF.
Note: To silence the audible alarm given to an EGC distress or
urgent message from Distress Alert Unit (IC-302), follow
the above procedure. DO NOT press the DISTRESS button
on the IC-302 to silence the alarm; you will transmit own
ship’s distress alert.
6. Press [Enter] to close the selection window.
7. Press [Esc] twice.