Operational overview, The communication unit – Furuno INMARSAT-C MOBILE EARTH STATION FELCOM 12 User Manual

Page 25

Advertising
background image

1-1

OPERATIONAL OVERVIEW

This chapter provides an overview of the FELCOM 12 system.

The Communication Unit

The communication unit is the heart of the FELCOM 12 system, trans-
mitting and receiving messages and alerting you to equipment fault.

On its front panel you should see the POWER switch and POWER
lamp. Normally, the power is left on while underway.

POWER

FURUNO

INMARSAT- C MOBILE EARTH STATION

NAME PLATE

POWER
Switch

POWER
lamp

Figure 1-1 Communication unit IC-212

Self test

When the communication unit is turned on it conducts a series of
self-tests to check itself for proper operation.

When the audible alarm sounds

The audible alarm sounds in the following circumstances:

1) EGC distress or urgent message is received. (To silence the alarm,

press [ESC] followed by [F10].)

2) During the interval between the transmission of the distress alert

(by own vessel) and the receiving of the distress acknowledge sig-
nal from LES. (The alarm automatically stops when your ship
recives the distress acknowledge signal.)

3) The system status monitor detects equipment fault. (To silence the

alarm, press any key.)

The audible alarm sounds and the terminal unit displays which alarm
is sounding.

Advertising