Silencing the audible alarm, Silencing the alarm by the setup menu, Press [f8] to display the setup menu – Furuno INMARSAT-C MOBILE EARTH STATION FELCOM 12 User Manual

Page 36: Figure 1-13 auto mode setup menu

Advertising
background image

1-12

Silencing the Audible Alarm

Some error messages and alerts are accompanied by the audible alarm.
This alarm can be silenced, in most instances, by pressing any key. If
the alarm cannot be silenced in that manner, go to the Setup menu to
silence it. Note that the distress alert alarm transmitted by own ship
cannot be silenced by either method; it automatically stops when you
receive the distress acknowledge signal from LES.

Silencing the alarm by the Setup menu

1. Press [F8] to display the Setup menu.

File Edit Transmit EGC Reports Logs Options Setup Position StopAlarm

Current State: IDLE

DCE Ver **

SYNC ( NCS )
NCS: IOR LOGOUT

97-08-04 01:42 (UTC)

Setup

1. Distress Alert Setup
2. System Setup
3. Editor Setup
4. Terminal Setup
5. EGC Setup
6. Auto Mode Setup
7. E-Mail Setup
8. Directories
9. Configuration

Figure 1-12 Setup menu

2. Press [6] to display the Auto Mode Setup menu.

3. Press [

/

] key to go to the Receive Alarm line.

4. Press [Enter] to open the selection window.

Setup

7. E-Mail Setup
8. Directories
9. Configuration

Auto Mode Setup

ON

OFF

Auto Log Print

Receive Alarm

Auto Telex Msg Save
Auto EGC Msg Save

Figure 1-13 Auto mode setup menu

Advertising