Furuno INMARSAT-C MOBILE EARTH STATION FELCOM 12 - Manual (Page 114)

4-28
Display send message log or receive message log
You can display send message log or receive message log as follow.
1. Press [F6].
2. Press [1] (Send message log) or [2] (Receive message log).
3. Press [Esc] to escape.
EGC Messages
EGC messages are automatically received, printed and saved to the
DTE. The memory capacity for EGC message is 32k bytes. When the
memory is full, the oldest information is deleted.
Displaying and reprinting EGC messages
1. Press [F6].
2. Press [3]. The Display EGC Message screen appears.
File Edit Transmit EGC Reports logs Options Setup StopAlarm
Current State: IDLE
DCE Ver **
SYNC ( NCS )
NCS: IOR LOGIN 97-08-19 07:15 (UTC)
LAT: 35:00.00N
LON: 135:00.00E
Display EGC Message
EGC Message --- MET Navarea Warning or MET Forecast ---
Message Sequence No.
LES
Priority
Size
Receive Date & Time
ZCZC
NAVAREA XI WARNING
NAVAREA XI 0480.
NORTH PACIFIC, WESTERN PART.
DISTRESS SIGNALS ON 243MHZ AND
121.5 MHZ RECEIVED IN
29-40.4N 174-15.0E.
Ctrl+P: Print P: Previous N: Next
: 00472
: YAMAGUCHI
: Urgent
: 285 characters
: 97-08-19 06:08 (UTC)
Figure 4-39 Sample Display EGC Message screen
3. To scroll the message, use the up and down arrow keys.
4. To view next and previous messages, use the [N] and [P] keys.
5. To print the message appearing on the display, press and hold
down [Ctrl] and press [P]. To stop printing, press [Esc].
EGC messages can be automatically saved on a floppy disk. See page
4-24 for details.