Furuno INMARSAT-C MOBILE EARTH STATION FELCOM 12 - Manual (Page 44)

2-6
30. Press [Esc] to open the update window.
Setup
9. Configuration
System Setup
System Date & Time
Preferred NCS
MES Operation Mode
Nav Port
Active Port
Message Output Port
EGC Output Port 01:53 97-08-04 (YY-MM-DD)
IOR
INMARSAT-C
OFF
DTE1
DTE1
DTE1
Update
Yes No
Figure 2-13 System setup menu, update
31. Press [Enter] to select “Yes”.
32. Press [Esc] to register all system setup settings and return to the
standby display.
Terminal Setup
Terminal Setup menu provide for date display format,screen saver
and display mode.
1. Press [F8] to select the Setup menu.
2. Press [4] to display the Terminal Setup screen.
Terminal Setup
Date Disp. Form
Screen Saver
Display Mode YY-MM-DD
ON
Normal Mode
Figure 2-14 Terminal Set up menu.
3. Press [Enter] to open the selection window.
4. Select date display format “YY-MM-DD(year-month-day)”,
“ MMM-DD-YY(month-day-year )” or “ DD-MMM-YY(day -
month -year)”.
5. Press [Enter] to close the selection window.
6. Press [
/
] to advance the cursor to the Screen Saver line.
7. Press [Enter] to open the selection window.
8. Select “ON” or “OFF”.
9. Press [Enter] to close the selection window.
10. Press [
/
] to advance the cursor to the Display Mode line.
11. Press [Enter] to open the selection window.