Fujitsu Siemens Computers Loox T - Manual (Page 34)

Getting started
Calibrating the screen
The display of your Pocket PC is a touchscreen. To ensure that the touchscreen of your Pocket PC
reacts correctly when touched with the pen, you will be asked to calibrate the touchscreen after the
initial start-up.
►
Touch the centre of the cross hairs that appear on the display with the stylus.
► You will need to repeat this procedure several times, whereby the cross hairs will appear at
different locations on the display each time.
► Follow the instructions on the display.
Entering a PIN (optional)
If you are using a SIM card you will be asked to enter your PIN once the calibration process is
finished.
►
Enter your PIN.
Familiarising yourself with basic operation of the
device
Next, the operating system provides a brief introduction to the operation of the Pocket PC with the
pen after the initial start-up.
►
Follow the instructions on the display.
Today screen
Following the introduction the Today screen appears. The Today screen shows all important current
information at a glance. From this screen you have access to all programs and to the system
settings.
i
Please also use the help function available on your Pocket PC if you want to know more
about using the programs contained in the operating system.
24 A26391-K182-Z120-1-7619, edition 1