Fujitsu Siemens Computers Loox T - Manual (Page 35)

Getting started
Internet and intranet connections with
CONNECTMOBILITY-E2C
CONNECTMOBILITY-E2C (E2C for short) is a tool that enables you to establish a connection to the
Internet or to your company's intranet very easily by simply pressing a button.
With a few clicks you can change between your company WLAN, your private WLAN at home or a
WLAN hotspot in a cafe or at the airport. You can connect to BT or IrDA via your GPRS-capable
telephone without having to think about settings and automatically start your preferred application.
i
If you are using a SIM card from one of the major network operators in Europe then the
pre-settings of your network operator will be automatically adopted.
Detailed information on the use of CONNECTMOBILITY-E2C can be found in the help file
on your Pocket PC.
Starting CONNECTMOBILITY E2C
► Select Start - Programs - CONNECTMOBILITY E2C.
CONNECTMOBILITY-E2C is started.
User data dialogue
If additional data are required to establish the connection to the required target network, e.g. GSM,
VPN, WLAN WPA PEAP, then they are requested after the "Connect" softkey is pressed - but before
the actual connection is established.
The following data may be concerned depending on the type of connection:
•
User name
• Password
• Domain
• RSA ID PIN
• RSA ID Token
A26391-K182-Z120-1-7619, edition 1 25