Fujitsu Siemens Computers Loox T - Manual (Page 59)

Operating the Pocket PC
Switching the Pocket PC off and on during normal use
(Standby mode)
Switching the Pocket PC to Standby mode
► From the Today screen, briefly press the End button.
The Pocket PC is switched to Standby mode.
i
If you have specified a switch-off time in the system settings, your Pocket PC will
automatically switch to Standby mode after this specified time.
There are two ways to switch on your Pocket PC:
Switching on with the End button
► Briefly press the End key.
► If the device lock is activated, press and hold the Enter button afterwards.
The Pocket PC is switched on.
Switching on with the application buttons
By default, you can also switch your Pocket PC on by briefly pressing one of the application buttons.
►
Briefly press any one of the application buttons.
The applications assigned to the respective button appear on the screen.
i
With the appropriate setting in FSC KeyLock you can prevent the Pocket-PC being started
by pressing the application button.
Detailed information about FSC KeyLock can be found in the help file on your Pocket PC.
A26391-K182-Z120-1-7619, edition 1 49