Fujitsu Siemens Computers Loox T - Manual (Page 67)

Operating the Pocket PC
Inserting and removing an expansion card
A slot enables the operation of an expansion card of the type "Secure Digital I/O" or
"MultiMediaCard".
!
Observe the manufacturer's instructions when using the expansion cards.
Never use force when inserting or removing an expansion card.
Make sure that no foreign objects enter the slot.
Inserting the expansion card
2
1
3
► If necessary, also press on the edge of the placeholder so that the placeholder is slightly
pushed out of the slot (1).
► Pull the placeholder out of the Pocket PC (2).
► Carefully push the expansion card into the slot (3).
The expansion card can protrude by one to several millimetres (depending on the type of expansion
card).
i
Keep the placeholder for the expansion card in a safe place. When you remove the
expansion card again, you should reinsert the expansion card placeholder. This prevents
foreign matter from getting into the slot.
A26391-K182-Z120-1-7619, edition 1 57