Fujitsu Siemens Computers Loox T - Manual (Page 45)

Making telephone calls with the Pocket PC
Using the Voice Commander
With the aid of the Voice Commander speech recognition application you can save a voice identifier
for each of your contacts. Once this has been set up, you only need to say the voice identifier in the
Voice Commander application and your Pocket PC will automatically dial the telephone number of
the contact.
i
For best results with the Voice Commander system, we recommend that you assign the
Voice Commander application to one of the application keys – see "Configuring the
application buttons".
Making a call via Voice Commander
► Select Start - Programs - Voice Commander.
Voice Commander is opened. You are prompted to speak a command.
►
Say "call <voice identifier>", e.g. "call test", to dial the telephone number of the contact with the
corresponding voice identifier.
Once Voice Commander has been able to assign your text to a command you will be asked to
confirm it.
►
If the command has been correctly recognised say “yes”.
The phone number of the contact is dialled.
i
Detailed information on the use of the Voice Commander system can be found in the help
file on your Pocket PC.
A26391-K182-Z120-1-7619, edition 1 35