FUJITSU F2MC-8L F202RA - Manual (Page 53)

37
CHAPTER 3 CPU
3.4.2 Steps in the Interrupt Operation
When an interrupt request is generated in a peripheral function, the interrupt controller
notifies the CPU of its interrupt level. If the CPU can accept an interrupt, the CPU
temporarily stops the program that is handling and starts the interrupt processing
routine.
■ Steps in the Interrupt Operation
The steps for processing an interrupt are: occurrence of a source of an interrupt in a peripheral function,
designation of the interrupt request flag bit (request F/F), check on the interrupt request enable bit (enable
F/F), check on the interrupt level (ILR1, 2, 3, or 4, and CCR: IL1 and IL0), check on another request with
the same level, and check on the interrupt enable flag (CCR: I).
Figure 3.4-2 shows the steps in the interrupt operation.
Figure 3.4-2 Steps in the Interrupt Operation
➀
After a reset, all interrupt requests are prohibited.
Initialize the peripheral functions that generate interrupts using a initialization program for peripheral
functions, specify interrupt levels in the interrupt level setting registers (ILR1 to ILR4) concerned, then
start up the peripheral functions.
Interrupt levels 1, 2, and 3 can be specified. Level 1 is the highest level, and level 2 is the second
highest level. Level 3 prohibits interrupts from the peripheral functions to which it is assigned.
➁
Run the main program. (For a multiple-interrupt, run the interrupt processing routine.)
➂
When a peripheral function generates a source of an interrupt, the interrupt request flag bit for
peripheral function (request F/F) is set to "1". If the interrupt request enable bit for a peripheral function
is turned on (enable F/F = 1) at that time, an interrupt request is output to the interrupt controller.
IL I PS
MB89202 CPU
AND
RAM
Inter
nal b
u
s
Operation
Unit
Check
Com-
parator
Enable
F/F
Source
F/F
Peripheral
Le
v
el compar
ator
Interrupt
controller
Main
program
Cancellation
of a reset
Initial setting
for interrupt
Execution
of main
program
Interrupt
processing
routine
Update of IL
PC and
PS saved
Request
cleared
Level
check
Interrupt
processing
PC and PS
restored
Occur-
rence of
interrupt
RETI
PC and PS
restored
..
.