1 overview of a/d converter, Overview of a/d converter – FUJITSU F2MC-8L F202RA User Manual
Page 276
260
CHAPTER 12 A/D CONVERTER
12.1
Overview of A/D Converter
An A/D converter, which is of a 10-bit successive approximation type, selects an input
signal from eight channel analog inputs. The A/D converter can be activated with
software, an internal clock, or the output of an 8/16-bit capture timer/counter (16-bit
mode).
■
A/D Conversion Functions
These functions convert the analog voltage (input voltage) input from an analog input to 10-bit digital
values.
•
An analog input can be selected from eight channels.
•
The conversion speed is 38 instruction cycles (when the main clock oscillation frequency is 12.5 MHz,
the speed is 12.2
µs).
•
When A/D conversion is completed, an interrupt occurs.
•
Software can determine that the conversion has been completed.
To activate A/D conversion functions, follow one of the methods given below.
•
Activation with a software program.
•
Continuous activation through the output of a time-base timer (main clock oscillation frequency divided
by 2
8
).
•
Continuous activation through the output of an 8/16-bit capture timer/counter (16-bit mode).