4 set- up of video plotter display – Furuno FR-2105-B User Manual
Page 118
-4.4-
4.4
Set- up of Video Plotter Display
Hiding/Showing Graphics
1. Press [NAV MENU] and [8] to display the PLOT DISPLAY SELECT menu. Current
selections appear in reverse video.
Blank items have been turned off on the INITIAL SETTING menu. For further details see
4.11 Initial Settings.
[PLOT DISP SELECT]
1 [VIDEO PLOTTER 1]
2 DANGER HIGHLIGHT OFF/ON
3 COAST LINE
OFF/ON
4 LAND DENSITY
OFF/ON
5 PLACE NAME
OFF/ON
6 MARK
OFF/ON
7 OWN SHIP PLOT
OFF/SEPARATE/CONTINUE
8 TARGET PLOT
OFF/ON
9 CONTOUR LINE
OFF/ON
0 GRID
OFF/ON
2. Press appropriate numeral key twice to hide or show graphic.
3. Press [ENTER].
4. Repeat steps 2 and 3 to hide or show other graphics.
5. Press [NAV MENU] to close the menu.
Note:
LAND DENSITY fills (ON) or hollows (OFF) land on an electronic chart. Land will be
hollow when wrong card or wrong scale is used regardless of LAND DENSITY setting.
Hiding/Showing Nav Data
You may select what navigation data to display on the video plotter display as follows:
1. Press [NAV MENU] to display the NAV INFORMATION 1 menu.
[NAV INFORMATION 1]
1 [VIDEO PLOTTER 1]
2 SELECT NAVAID
GPS+LC/DEAD RECKONING
3 OWN SHIP POSN
OFF L/L
4 POSN
xx°xx.xxx N/S
xx°xx.xxx E/S
5 +CURSOR DATA
OFF/L/L
6 WPT DATA
OFF/REL/TRUE
7 [NAV LINE]
8 [WAYPOINT]
9 WIND DATA
OFF/ON
0 [NAV INFORMATION 2]