Furuno FR-2105-B - Manual (Page 141)

-6.6-
The test program checks the logic boards and the keyboard. The squares ( □ ) represent the
corresponding keypads. Numerals indicate the position of the controls under check. Note:
Analog controls such as Brilliance, A/C Rain, A/C Sea and Gain controls can not be tested.
FR-2105 TEST
PROGRAM NO ROM RAM CRAM DISPSW
1234
MAIN 0359149103 OK OK
ARPA 1859038103 OK OK OK 1010
DSP 1859039101 OK OK OK
RP 0359150102 OK OK OK 0001
DRAM OK
RP BOARD BAT OK
RP CARD 1 OK CARD 2 OK
CARD 1 BAT OK
ANTENNA SPEED 42 RPM
TRIG FREQ 872 Hz
MAG CURRENT 11 V
R. MONITOR 1.2 V
TUNE IND 1.1 V
□ □ □ □ □ □ □
1 2 3 002 □ □ □ □ 2 5 1
□ □□ □□ □□ □ □□ □ □ □ □ 0 0 8
□ □□ □ □ □ □
To quit press [STBY/TX] key twice.
To quit the test program, press the [STBY/TX] key twice.