Fujitsu Siemens Computers Connectivity Peripherals Point 1600 - Manual (Page 47)

Confirming External Power Is Supplied 2-31
Confirming External Power Is Supplied 2
All connectivity peripherals (except for the portable port expander) supply power to the pen tablet when
the AC adapter is properly connected. To confirm that external power is supplied, place the pen tablet in
the connectivity peripheral and observe the Charge Status light on the pen tablet. The Charge Status light
should either flash once or turn on continuously (depending on the percent of full charge in the pen
tablet’s battery pack) when the pen tablet is initially inserted in the connectivity peripheral. Figure 2-24
shows the status lights on the pen tablet.
Figure 2-24. Status Lights on the Pen Tablet
MIC Built-in
Microphone
Power
HDD Access
Charge Status
Low Battery