2 gigabitethernet card specifications, 1 specifications – FUJITSU Solaris PCI GigabitEthernet 3.0 User Manual

Page 10

Advertising
background image

1.2 GigabitEthernet card Specifications

1.2 GigabitEthernet card Specifications

The FUJITSU PCI GigabitEthernet card is an adapter that is installed into a PCI slot or
a PCI Express slot.

1.2.1 Specifications

The specification of the FUJITSU PCI GigabitEthernet adapter is listed in "Table 1.2.1
PCI GigabitEthernet Card Specification" and "Table 1.2.2 PCI Express GigabitEthernet Card
Specification".

Table 1.2.1 PCI GigabitEthernet Card Specification

Item

Compatibility

Host Bus Interface

PCI Local Bus Revision 2.1 or later

Network Interface

1000Base-SX (PW008GE4, PW0G8GE1)
10/100/1000Base-T (PW008GE5, PW0G8GE2, PRIMEPOWER250/450 secondary

LAN)
10/100/1000Base-T * 4ports(PW008QG1)

Host Data Transfer

32/64-bit Bus Mastering DMA Transfers

Bus Type

One PCI slot per card.

Power Requirements

Maximum: 4.7W(PW008GE4/5, PW0G8GE1/2), 14.0W(PW008QG1)

Connections

1000Base-SX (P008GE4, PW0G8GE1): Multi-mode Fibre (62.5/125 micron)
SC-Duplex
10/100/1000Base-T (PW008GE5, PW0G8GE2, PRIMEPOWER250/450 secondary
LAN, PW008QG1): Cat5e Cable (Cat5 cable can also be used for
10/100Mbps.)

Table 1.2.2 PCI Express GigabitEthernet Card Specification

Item

Compatibility

Host Bus Interface

PCI Express 1.0a (SE0X7GD1X, SE0X7GD2X)
PCI Express 1.1 (SE0X7GQ1X)

Network Interface

1000Base-SX * 2ports (SE0X7GD2X)
10/100/1000Base-T * 2ports (SE0X7GD1X)
10/100/1000Base-T * 4ports (SE0X7GQ1X)

Host Data Transfer

SE0X7GD1X, SE0X7GD2X: PCI Express 4lane Bus Mastering DMA Transfers
SE0X7GQ1X: PCI Express 8lane Bus Mastering DMA Transfers

Bus Type

One PCI slot per card.

Power Requirements

Maximum: 9.1W(SE0X7GD1X), 9.2W(SE0X7GD2X), 15.0W(SE0X7GQ1X)

Connections

1000Base-SX(SE0X7GD2X):

Multi-mode Fibre

(LC-SC: 62.5/125 micron and 50/125 micron
(A card side is LC. It is used when connection place partner
equipment is SC.),
LC-LC: 62.5/125 micron and 50/125 micron)

10/100/1000Base-T (SE0X7GD1X, SE0X7GQ1X):

Cat5e Cable (Cat5 cable can also be used for 10/100Mbps.)

● PW008GE4, PW0G8GE1 and SE0X7GD2X only supports full duplex connection. Half-duplex

3


Advertising