FUJITSU Solaris PCI GigabitEthernet 3.0 - Manual (Page 58)

4.2 Configuration of the LinkAggregation Feature
Member-instance: fjgi0, fjgi2
Distribution mode: Source/Destination IP address distribution
The /etc/opt/FJSVla/config file for this configuration should look similar to the
following:
#
# FJSVla: FUJITSU LinkAggregation setup sample file
#
# *attension: Don't use the different link_speed interfaces in same group,
# and can't use half duplex interface in LinkAggregation.
#
# - member_instance Input the number of interface.
# The available members are max 7.
# Please don't include the aggregator_interface number.
# - mode 1:Mac Hash
# 2:Destination Address
# 3:Source and Destination Address
#
# format:
# aggregator_interface member_instance[:member_instance] mode
#
# example
# fjgi0 1:2:3 1
# fjgi4 5 2
fjgi1 0:2 3
51