Furuno NAVNET GD-1920C - Manual (Page 169)

7. CUSTOMIZING YOUR UNIT
7-8
7.2.3 Function key setup
The function keys provide one-touch execution of a desired function. The default radar
function key settings are as shown in the table below.
Function Key Default Function Function Key Label
1 Turn heading line off. HL
2 Turn range rings on/off. RNG
3 Turn echo trail on/off. TRL
4 Turn display offcenter on/off. OFC
5 STBY/TX TX
If the above settings are not to your liking you may change them as follows:
1. Press the MENU key.
2. Press the FUNCTION KEY SETUP soft key.
FUNC
KEY
EDIT
RETURN
Function key
setting
Function
key label
H
L
R
N
G
T
R
L
O
F
C
T
X
SOFT KEY 1
HL: HDG LINE OFF
SOFT KEY 2
RNG: RINGS ON/OFF
SOFT KEY 3
TRL: ECHO TRIAL
SOFT KEY 4
OFC: OFFCENTER
SOFT KEY 5
TX: STBY/TX
X
Radar function key menu
3. Select the function key you want to program, then press the EDIT soft key.
SOFT KEY 1
OFF
HL: HDG LINE OFF
MOD: MODE
GAI: GAIN
SEA: A/C SEA
RAI: A/C RAIN
FTC: FTC
ES: ECHO STRETCH
PLS: PULSE LENGTH
ZOM: ZOOM
SOFT KEY 1
OFC: OFFCENTER
TRL: ECHO TRAIL
RNG: RINGS ON/OFF
TLL: TLL OUTPUT
ALM: GUARD ALARM
EBL: EBL
VRM: VRM
TTM: TTM ON/OFF
WMK: WPT ON/OFF
WTM: WATCHMAN
SOFT KEY 1
ACQ: ACQUISITION
TX: STBY/TX
RSR: SOURCE RADAR
DBX: D. BOX ON/OFF
CHG: CHANGE CNTRL
QP: QUICK POINT
MRK: MARK ENTRY
Scroll
down Scroll
down
T T
S S
Radar function key options
4. Select function desired with the Trackball, then press the ENTER soft key or ENTER
knob to register your selection.
5. Press the MENU key to close the menu.