9 1.5.2 selecting a display – Furuno NAVNET GD-1920C User Manual

Page 20

Advertising
background image

1. OPERATIONAL OVERVIEW

1-9

1.5.2 Selecting a display

1. Press the

DISP key to show the display screen selection window. The icons of modes

not available are shaded. HOTPAGE 1-HOTPAGE 6 are user-arrangeable displays

called “hot pages,” which you can configure as you like. For further details, see the

paragraph “7.6 Hot Page Setup.”

RADAR PLOTTER SOUNDER NAV DATA OVERLAY EXT VIDEO WX FAX

· TURN KNOB TO SELECT MODE
AND PUSH KNOB TO ENTER.
· PUSH ANY SOFT KEY TO
SELECT IMAGE SOURCE.

Basic display
screens

Hot pages

Selected
item

HOTPAGE 1 HOTPAGE 2 HOTPAGE 3 HOTPAGE 4 HOTPAGE 5 HOTPAGE 6

Display screen selection window

Note: “WX FAX” is available only when the facsimile receiver FAX-30 is connected. If

the message “AUX SOURCE IS DISCONNECTED. PUSH ENT KNOB TO EXIT.”

appears, press the

ENTER knob and select other item.

2. Rotate the

ENTER knob to select a basic display screen or a hot page screen.

3. Push the

ENTER knob.

4. If you select a basic display screen, a group of appropriate combination displays appear.

In the example below, the radar combination screens are shown. When WX FAX is

selected at step 2, a combination display does not appear.

PUSH ENTER KNOB.

RETURN

Radar combination screen selection window

5. Rotate the

ENTER knob to select display desired.

6. Push the

ENTER knob to finish.

Advertising