Furuno NAVNET GD-1920C - Manual (Page 17)

1. OPERATIONAL OVERVIEW
1-6
1.4 Display Brilliance, Panel Brilliance, Hue
You can adjust display brilliance, panel brilliance and hue as shown below.
1.4.1 Display brilliance, panel brilliance
1. Press the POWER/BRILL key momentarily. A set of soft keys for adjustment of
brilliance and hue appear.
BRIDGE
FISH WP-002
34 ° 22. 3456'N 359.9 ° M TRIP NU
080 ° 22. 3456'E 19.9 kt 99.9 nm
DISPLAY BRILLIANCE
8
PANEL
BRILL
HUE
RETURN
BRILL
CONTST 12/
H-UP
3nm
LP
319. 9
°
M
359.9 ˚R
11.70
nm
+
PANEL
BRILL
HUE
RETURN
RADAR
STBY
Radar Display Plotter Display
DISPLAY BRILLIANCE
8
BRILL
CONTST
16.0nm
DISPLY
BRILL DISPLY
BRILL
Active soft key is highlighted.
RADAR
STBY
Brilliance adjustment soft keys
2. Press the DISPLY BRILL or PANEL BRILL soft key as appropriate. An adjustment
window appears at the bottom of the screen. This window shows the name of the item
selected for adjustment plus current brilliance level, by bar graph.
DISPLAY BRILLIANCE
8
PANEL BRILLIANCE
8
Display brilliance Panel brilliance
Display brilliance and panel brilliance windows
3. Adjust the ENTER knob, clockwise to raise the setting or counterclockwise to decrease
it. You may also use the soft key pressed at step 2. Eight levels of display brilliance and
panel brilliance are available.
4. Hit the RETURN soft key to finish.
Note 1: If the unit is turned off with minimum brilliance, the screen will be dark at the next
power-up. Press the POWER/BRILL key consecutively to adjust the brilliance.
Note 2: This equipment does not have a contrast control.