Furuno FAR-2107(-BB) - Manual (Page 127)

1. RADAR OPERATION
1-105
1.54 Sub Monitor (A, B, C and W types)
The picture from a radar outside the LAN network can be shown on this radar
(processor unit+display unit+control unit).
1. Put the cursor in the ANTENNA box at the upper left side of the screen.
2. Right-click to show the ANT SELECT menu.
[ANT SELECT]
ANT1:
X-BAND
12 FORE
ANT2: X-BAND
12 MAIN TOP
ANT3: X-BAND
MAIN TOP 12
ANT4: X-BAND
AFT
OWN RADAR No.: 2
1 DISP1
ANT1
MASTER
2 DISP2 ANT2
MASTER
* Not available on IMO or A radar.
9 STORE INTER-SW
NO/YES
0 SUB MONITOR*
OFF/ON
3 DISP3 ANT3
MASTER
4 DISP4 ANT4
MASTER
12
3. Spin the scrollwheel to select 0 SUB MONITOR then push the left button.
4. Spin the scrollwheel to select ON then push the left button.
The antenna box shows "SUB" and the image from the sub monitor is shown
on this radar
5. Push the right button to close the menu.
Antenna-related functions of the sub monitor; for example, pulselength, cannot
be controlled from this radar.