Furuno CI-68 - Manual (Page 20)

1. OPERATIONAL OVERVIEW
1-10
1.7 Choosing the Range
You may choose the speed range as follows:
1. Press the [RANGE] key to show the range setting window.
TIDE SPEED RANGE
KNOB OR CURSOR PAD: CHANGE SETTING
1.0
kt (0.5-10.0)
Range setting window (example: range setting window for tide vector display)
2. Within five seconds after completing step 1, operate the Setting Knob or the CursorPad
to set the range.
Setting Knob: Rotate clockwise to raise the range; counterclockwise to lower the range.
CursorPad: Press
► or ▲ to raise the range; ► or ▼ to lower the range.
Display and range to set
Display Range
Tide vector Tide speed range setting window appears. Set tide/tide differential range
(radius of vector display ring) appropriately.
Ship’s speed The ship’s speed range setting window shown depends on whether SCALE
SYNC in the DISP2 sub menu is set to ON or OFF.
ON:
Port-starboard and fore-aft speeds are synchronized. The ship’s speed
range setting window appears. Set speed appropriately.
OFF: The ship’s speed range setting window appears. Set fore-aft speed
appropriately.
Graph The speed range setting window shown depends on the setting of MODE in
the DISP1 sub menu.
TIDE or TIDE DIF:
The tide speed range setting window appears. Set tide
speed range (port-starboard of tide speed/tide differential graph)
appropriately.
SPEED:
The ship’s speed range setting window appears. Set ship’s speed
range (fore-aft of ship’s speed graph) appropriately.
Course plot The display scale setting window appears. Set display scale as appropriate.
Echo level Tide speed range setting window appears. Set tide and tide differential range
(radius of vector display ring) appropriately.