Furuno CI-68 - Manual (Page 70)

FURUNO
CI-68
SP - 2
E7252S01A
6 I/O DATA
6.1 Format Current loop, NMEA 0183 ver. 1.5/2/0/3.0, IEC 61162-1 Ed. 2
IEC 61162-2, current indicator (FURUNO’s own format)
6.2 NMEA input sentences ZDA, RMC, RMA, GGA, GLL, VTG, HDT, HDM, HDG, DBT, DPT,
MTW
6.3 NMEA output sentences VBW, VDR, VHW, VTG, VLW, CUR
6.4 CIF input sentences System time, measuring position, heading, bearing, depth, water
temperature
6.5 CIF output sentences Tide data for 1
st
layer, tide-measured speed, depths for multi-layers
6.6 Current indicator data Date and time data, position data, speed data, current indicator data,
reverberation level data, speed calibration data, angle calibration
data, alarm output data, other
7 POWER SUPPLY
7.1 Transceiver unit, 100/110/115-120/200/220/220/230/240 V
AC, single phase,
monitor unit, control unit 3A (100 VAC) – 1.5A (200 VAC)
8 WATERPROOFING
8.1
Monitor
unit IPX0
8.2 Transceiver unit IPX0
8.3 Control unit (panel) IPX2
8.4 Control unit (rear) IPX0
8.5 Junction box IPX4
8.6 Transducer IPX8
9 ENVIRONMENTAL CONDITIONS
9.1 Temperature Transducer: -5°C to 35°C
Other units: -15°C to 55°C
9.2 Relative humidity Less than 95% (40°C)
10 COLOR
10.1
Monitor unit Panel: N3.0, Cover: 2.5GY5/1.5
10.2 Control unit Panel: N3-2, Cover: 2.5GY5/1.5
10.3 Transceiver unit 2.5GY5/1.5