Furuno CI-68 - Manual (Page 48)

3. CUSTOMIZING THE SYSTEM
3-16
Trip time alarm
The trip alarm sounds when the preset trip time has elapsed.
1. Press the [MENU] key to open the menu.
2. Press ▲ to place the cursor on the main menu title field.
3. Press ◄ or ► to choose ALARM.
4. Press ▲ or ▼ to choose TRIP-TIME.
5. Press ► to show the trip time alarm setting screen.
**TRIP ALARM**
TRIP TIME : 0 hr
: 0 min
: 0 sec ANY FUNC KEY: QUIT
F
G
KEY: SELECT
J K
KEY: SET
Time trip alarm setting screen
6. Press ▲ or ▼ to choose item to set.
7. Press ◄ or ► to set.
8. Press any function key to quit and return to the ALARM menu. “
” appears to the right
of TRIP-DIST. When the alarm setting is violated the audible alarm sounds and an alarm
message appears.
9. Press the [MENU] key to close the menu.
3.5.4 Disabling/enabling the audible alarm
1. Press the [MENU] key to open the menu.
2. Press ▲ to place the cursor on the main menu title field.
3. Press ◄ or ► to choose ALARM.
4. Press ▲ or ▼ to choose the alarm you want to process. (An alarm where
or
appears.
5. Press ◄ or ► to show or as appropriate.
6. Press the [MENU] key to close the menu.
3.5.5 Disabling an alarm
1. Press the [MENU] key to open the menu.
2. Press ▲ to place the cursor on the main menu title field.
3. Press ◄ or ► to choose ALARM.
4. Press ▲ or ▼ to choose the alarm you want to disable.
5. Press any function key, and the following window appears.
AREA IS ALREADY SET SET: J K
ARE YOU SURE TO RESET? : NO YES
PRESS ANY FUNCTION KEY AFTER SETTING.
6. Press ► to choose YES.
7. Press any function key to return to the ALARM menu. The
or is removed.
8. Press the [MENU] key to close the menu.