Furuno CI-68 - Manual (Page 43)

3. CUSTOMZING THE SYSTEM
3-11
SCALE SYNC
Choose whether to interlock port-starboard speed range with fore-aft speed range or not.
DRIFT SCALE
Set the port-starboard speed range on the ship’s speed display. The choices are 0.5, 1.0,
2.0, 3.0, 5.0 and 10.0 (kt).
Note:
You may adjust DRIFT SCALE at any time, however you must turn off SCALE SYNC
in the DISP2 menu for it to become active.
SCALE
Set the range of fore-aft speed and on the ship’s speed display. The choices are 0.5, 1.0,
2.0, 3.0, 5.0, 10.0, 20.0 and 30.0 (kt). Port-starboard speed range is also set.
Note:
You may adjust SCALE at any time, however you must turn on SCALE SYNC in the
DISP2 menu for it to become active.
DRIFT HISTORY
Set the range for the port-starboard speed history graph. The choices are 0.5, 1 and 2 (kt).
HISTORY
Set the range for the fore-aft speed history graph. The choices are 4, 8, 16 and 32 (kt).
HISTORY SHIFT
Set the amount of shift for the fore-aft speed history graph among –2, -1, 0, 1, 2, 4 and 8
(kt).
SCALE
Choose the scale to use in the course plot display, from among 1:10000, 1:20000, 1:50000
and 1:100000.
INTERVAL
Choose the display interval for the tide vector in the course plot display. The choices are 0.5,
1.0, 1.5, 2.0, 2.5, 3.0, 3.5 and 4.0. The figures are scale on course plot display.
SHIP TRACK
Turn own ship’s track display on or off.
VECTOR LENGTH
Choose the vector length from LONG or SHORT. For LONG 1 mm in length is equal to 0.1
knot.
TEXT WINDOW
Turn the text window on the course plot display on or off.