Furuno FM-8800D - Manual (Page 128)

APPENDIX
AP-22
• Lock lever: Locks the front panel. The LOCK position prevents opening of
the front panel.
• Cutter: Cuts paper. Pull up the paper to cut it.
• Paper feed slot: Feeds paper.
Setting the DIP switch
The DIP switch at the top of the frame functions to change printer specifications.
Default specifications are shown in the table below.
TABLE1 Setting DIP switch
Function 1 2 3 4 5 6 7 8 9 10
Small characters ON
Normal character OFF
Inverted printing ON
Upright printing OFF
22 digits printing ON
20 digits printing OFF
International characters Ref. TABLE 2
Printer mechanism compensation Ref. TABLE 3
Auto line feed ON
No
use
TABLE 2 International characters
Function 4 5 6
Japan OFF OFF OFF
United States OFF OFF ON
Germany OFF ON OFF
England OFF ON ON
France ON OFF OFF
Spain ON OFF ON
Italy ON ON OFF
Sweden ON ON ON
TABLE 3 Printer mechanism compensation
The left and right printing positions may vary over the course of a voyage. Printing position
is adjusted at the factory, however friction, etc. may cause misalignment. If misalignment
occurs, adjust printing position.
Addition to standard α 7 8
0 OFF OFF
-1 OFF ON
+1 ON OFF
+2 ON ON