Furuno FM-8800D - Manual (Page 16)

1. OPERATIONAL OVERVIEW
1-4
0
HI/LO
• Enters “0”.
• Changes the output power high (25 W) or low (1 W)
when proceeded by the SHIFT key.
However, the following channels are always 1 W.
INTL mode: CH15, CH17, CH75, CH76
USA mode: CH13, CH17, CH67, CH77
CANADA mode: CH15, CH17, CH20, CH65, CH77
S
*
SHIFT
• Press to activate secondary function.
• Moves the screen to previous item.
• Moves cursor backward for editor field.
T
LOG
#
• Displays transmitting/receiving messages.
• Moves the screen to next item.
• Moves cursor forward for editor field.
CH16 • Selects CH16 by one-touch action.
FILE • Opens the Message file list.
MENU • Opens the SETUP menu.
ENT • Registers the input.
(Same as pressing the CH selector.)
Additional keys of the handset HS-8800/HS-8000-W
Key Function
(up arrow key)
• With the SHIFT key pressed, this key increases volumes of
internal loudspeaker of remote station.
• Scrolls the screen up or increments setting value.
SQ
• Adjusts squelch level.
• With the SHIFT key pressed, turns off the auto squelch.
(down arrow key)
• With the SHIFT key pressed, this key decreases volumes
for internal loudspeaker of remote station.
• Scrolls the screen down or d ecrements setting value.
SQ auto
• Adjusts squelch level.
• With the SHIFT key pressed, turns on the auto squelch.
2
ABC
• Increases number at the memory channel or private
channel setting.
8
SCAN
TUV
• Decreases number at the memory channel or private
channel setting.