Furuno FM-8800D - Manual (Page 55)

3. DSC OPERATION FOR NON-DISTRESS CASES
3-9
4. Choose ABLE and press the ENT key. The display changes as shown below.
** Send Message **
PRESS CALL TO SEND
SHIP ACK
ROUTINE
COMM MODE : TELEPHONE
COMM OPTION : NO INFO
CH : 12
ACK
TO : 123456789
5. Press the CALL key more than three seconds to transmit the ACK BQ. The
display changes to the standby display with a channel specified.
4) Manually acknowledging a coast or ship call with "UNABLE."
1. When the equipment is set up with manual acknowledge and a coast or ship
call is received, the alarm sounds and the display shows the message
"Individual request call received."
Individual request
call received.
FROM : 123456789
ROUTINE
COMM MODE : TELEPHONE
COMM OPTION : NO INFO
CH : 12
ACK REQ
CANCEL ALARM
2. Press the CANCEL key to silence the alarm. The following display appears.
** Received Message **
APR01/04 12 : 34 ECC : OK
SHIP CALL
ROUTINE
COMM MODE : TELEPHONE
COMM OPTION : NO INFO
CH : 12
ACK REQ
FROM : 123456789
PRESS ENT TO ACK.