Furuno FM-8800D - Manual (Page 131)

APPENDIX
AP-25
Thermal Printer UTP-58E
For general operation notice, see Thermal printer UTP-80FK.
UTP-58E for RC-8800S/D-B (Rack Console) and PP-8800A (Printer)
Push the POWER switch and the POWER Lamp goes on. When the lamp in on data
received from the radiotelephone is printed. After completion of printing, feed paper out by
pressing the LINE FEED button.
PAPER COVER
OPEN button
POWER Lamp
LINE FEED
button
POWER
switch
Paper replacement
Paper: type TP058-30CL, code number 000-154-047-10
1. Push the PAPER COVER OPEN button to open the paper cover.
2. Load the roll paper as shown below.
3. Set the roll paper so that the end of paper is outside the printer, and then close the
cover by pressing both sides of the top of the paper cover.
1
2
3
3