FUJITSU SRS-1050 - Manual (Page 12)

Fujitsu SRS -1050
(
Page 10
Note: Softkey 1 also serves as the ENTER key (for entering
information as indicated in this User Guide).
Softkeys are a way of simplifying the phone and still supporting the
richness of ISDN features. These keys assume different functions
depending on the feature you are using, thus avoiding the need for a
large number of permanent function keys.
You can display the labels at any time without affecting the tasks
you are performing. The labels do not, however, have to be
displayed for these keys to work.
Timeouts
When you are setting up local features as described in Chapter 3,
some of the data entry displays have built-in timers. If you do not
enter information within fifteen seconds, the display reverts to the
menu for selecting the feature you were setting up. You must
reselect the feature and start again.
Starting Over
If for any reason you become confused while setting up a local
feature in menu mode, you can always press REG, softkey number
4, to return to the setup menus and start over.
Phone Operation
The following two features of ISDN phones may be different from
what you are used to:
Dialing 9. When you dial for an outside line (usually by pressing 9),
you do not hear a pause and a second dial tone. You can begin
dialing the telephone number immediately.