FUJITSU SRS-1050 - Manual (Page 76)

SRS -1050 Local Features ( Chapter 3
Page 3-22
3. All LEDs will light green if "All"
was previously selected. Only
Call Appearances with lit LEDs
will activate on Call Announce.
Press the buttons to turn the
LEDs on or off to select the
desired Call Appearance button.
4. Press ENTER. The following
screen appears:
SUPPORTED (SELECT/ALL)
COMPLETED
After selecting the Call
Appearance buttons that are to
be auto answered, you may
proceed to select Directory
Numbers for Call Screeners.
Specifying the Directory
Number for Intercom
When enabling the feature you
must specify a Directory Number,
which when used by the screener
to call the recipient, activates the
intercom automatically. All
recipients can specify the same
Directory Number, for all Call
Appearance Intercom calls.
Normal calls can still be made
from this Directory Number to
numbers not set up for intercom.
Up to three Directory Numbers
may be programmed.