FUJITSU SRS-1050 - Manual (Page 42)

SRS -1050 Voice Features ( Chapter 2
Page 2-14
You can use either of two
methods to place a leased
network call.
Method 1
Do not pick up the handset or
press SPEAKER button to dial a
leased network number. You
must enter all numbers before you
go off-hook.
1. Dial the number of the person
you want to call. As always, the
number you dial appears on the
first line of the screen.
2. Press the access code delimiter
button. A colon appears on the
screen after the number.
3. Dial the leased network access
code. The access code appears
on the screen after the colon.
4. To start the call, pick up the
handset or press the SPEAKER
button. Your digital set
automatically sends the entered
numbers and code to connect to
the leased network number.
Method 2
Do not pick up the handset or
press SPEAKER button to dial a
leased network number. You
must enter all numbers before you
go off-hook.
1. Press the access code delimiter
button. A colon appears on the
first line of the screen.
2. Dial the leased network access
code. The access code appears
on the screen after the colon.
3. Press the delimiter key again.
Another colon appears on the
screen after the access code.
4. Dial the number of the person
you want to call. The number
appears on the screen after the
second colon.
5. To start the call, pick up the
handset or press the SPEAKER
button. Your digital set
automatically sends the entered
numbers and code to connect to
the leased network number.
FUNCTION BUTTONS
The SRS-1050 has six function
buttons, located to the right of
the numeric keypad and arranged
as shown below.
TRANSFER
DROP
HOLD SPEAKER
REDIAL
CONFERENCE
19 18
20
Figure 2-1: Function Buttons