FUJITSU SRS-1050 User Manual
Page 15
( Fujitsu SRS -1050
Page 13
SPID
For your SRS-1050 to work on a multipoint line, it must have a valid
Service Profile Identifier (SPID). The SPID number is usually
entered when the SRS-1050 is installed. So if your digital set
already has a SPID number, you don't have to reenter it. If you do
need to enter a SPID number, you can find out what it should be
from your System Administrator or service provider. For the
procedure to enter a service profile identifier, see Chapter 3.
CAUTION:
Once the SPID number is entered, don't change it
unless your System Administrator tells you to do so. Your
SRS-1050 won't work without the correct SPID number. If the
SPID number is wrong, the set displays the message SPID NG.
(The message is redisplayed a second time if the data terminal
adapter SPID is also invalid.) Enter the correct SPID number
and you'll get the normal dial tone.
System Administrator
An important person for you to know is your System Administrator,
who may be your phone company representative or a member of
your telecommunications department.
ISDN is very flexible in allowing businesses to customize how it
works to meet their specific needs. This User's Guide refers you to
your System Administrator if a customized option may have been
chosen during installation.