FUJITSU SRS-1050 - Manual (Page 17)

( Fujitsu SRS -1050
Page 15
Section
Page
SETTING THE CALENDAR/CLOCK....................................................3-10
REINITIALIZING THE PHONE..............................................................3-12
UNANSWERED CALL LOGGING (UNA)............................................3-12
Enabling the UNA Feature...................................................................3-13
UNA on All Call Appearances ............................................................3-13
UNA on Selected Call Appearances ..................................................3-13
Disabling the UNA Feature .................................................................3-14
HANDSFREE, HANDSET, AND HEADSET MODES........................3-15
Switching from Headset Back to Handset Mode .............................3-16
Selecting Handsfree Operation (using the speaker and
microphone)...........................................................................................3-16
Switching Back to Handset-only Operation......................................3-16
Assigning a Leased Network Access Code Delimiter........................3-17
CALL ANNOUNCE INTERCOM ...........................................................3-18
Enabling or Disabling Call Announce Intercom...............................3-19
Call Announce Intercom on Selected Buttons .................................3-20
Specifying the Directory Numbers for Intercom...............................3-21
Specifying the Directory Numbers of Call Screeners.......................3-22
Announcing a Call by Intercom..........................................................3-23
ENTERING A SERVICE PROFILE IDENTIFIER ..................................3-24
USING Q.931 MESSAGE LOGGING......................................................3-25
ACTIVATING AND DEACTIVATING THE MIC-OFF BUTTON....3-27
CORRECTING MISTAKES.....................................................................3-28
Chapter 4
DATA OPERATION..................................................................................4-1
USING THE OPTIONAL TERMINAL ADAPTER................................4-1
MAKING AND TERMINATING A DATA CALL................................4-1
PLACING A CALL TO A LEASED NETWORK ...................................4-4
Appendix A Installation
Appendix B Line Parameters
Appendix C Testing
Appendix D Interpreting Q.931. Message Logging Codes
Appendix E ISDN Call Identification (ICI) Displays
Appendix F Error Messages