FUJITSU SRS-1050 - Manual (Page 82)

SRS -1050 Local Features ( Chapter 3
Page 3-28
2. Press ENTER. This menu of
message logging options
appears:
1:LOG-START 2:LOG-STOP
3:HISTORY (SELECT 1-3)
3. Make your selection:
To start message logging, dial 1
and press ENTER.
The message MESSAGE
LOGGING START appears.
To stop message logging, dial 2
and press ENTER.
The message MESSAGE
LOGGING STOP appears.
4. To return to normal operations,
press REG.
The standard display screen
reappears.
Reviewing Logged Messages
To review messages in History
mode, complete the following
steps:
1. Press REG (softkey 4), 9, ENTER
(softkey 1). This screen
appears:
MESSAGE LOGGING MODE
. . . . . . . . . . . . . . . . . . . . . . . . . . .
2. Press ENTER. This menu of
message logging options
appears:
1:LOG-START 2:LOG-STOP
3:HISTORY (SELECT 1-3)
3. To select the History mode,
press 3, ENTER (softkey 1).
The messages appear on a screen
like this:
1T>N:SETUP CR=01
HEX R-UP R-DOWN EXIT
The history file holds up to 24
messages. Scroll through
messages by pressing R-UP
(softkey 2) or R-DOWN (softkey
3).
4. To display the full message text
in hexadecimal:
•
Press R-UP or R-DOWN to
select a message.
•
Press HEX.
The message appears on a screen
like this:
08 01 CR:01 SETUP:05
NORMAL R-UP R-DOWN EXIT
The hexadecimal message may
take up more than one screen.
Scroll through the rest of the
message by pressing R-UP or R-
DOWN. To return to a normal
display (non-hexadecimal), press
NORMAL.