Friedrich 920-087-09 (12/10) - Manual (Page 12)

12
PXGA Standard Grille
Installation Instructions
1. Remove.the.center.support.and.weatherboard.if.still.installed.in.
the.sleeve.
2. Insert.six.plastic.grommets.into.the.grille.openings.from.the.outside.
of.the.grille.as.shown.in.Figure.13.
3. Insert.two.#8.x.⅜".sheet.metal.screws.(provided).in.the.top.two.
outside.edge.plastic.grommets,.and.tighten.them.half.way.into.
the.grommets.
4. Grasp. the. grille. by. the. attached. plastic. handles.. . Position.
it. with. the. condensate. drain. knockouts. facing. down..
.
From.inside.the.building,.maneuver.the.grille.through.the.wall.
sleeve.and.pull.toward.you.until.the.screw.heads.are.inserted.
into.the.keyhole.slots.at.the.top.of.the.wall.sleeve...Tighten.the.
two.screws.completely.
5. Insert.the.remaining.screws.into.the.remaining.holes.and.tighten.
securely.
Figure 13
Standard Grille
WARNING
Falling Object Hazard
Not following Installation Instructions for
mounting your air conditioner can result
in property damage, injury, or death.
FRP013
WALL SLEEVE
WEATHERBOARD
CENTER SUPPORT
STANDARD GRILLE
PLASTIC HANDLES
PLASTIC GROMMETS
WALL
SLEEVE
STANDARD
GRILLE
#8 x 3/8”
SHEET METAL
SCREW
Description
Stamped Aluminum Grille
Plastic Grommets
#8 x ⅜" Sheet Metal Screws
Quantity
1
6
6
PXGA Standard Grille