Fujitsu Siemens Computers Pocket LOOX 600 - Manual (Page 34)

Operating Pocket LOOX 600 Backing up data with LX Backup
26 A26391-K120-Z120-1-7619
Backing up data with LX Backup
The Pocket LOOX 600 saves your data such as appointments, addresses, things to do and notes,
as well as all documents in the RAM memory of the device. These data are backed up to your PC
during synchronisation with ActiveSync. However, to also make current data backups away from
home or while on business trips, there is
LX Backup .
LX Backup backs up an image of the RAM memory of your Pocket PC on SD (Secure Digital), MMC
(MultiMediaCard) or CF (CompactFlash) memory cards. If your Pocket PC has experienced a power
failure and the data from the RAM memory have been deleted, then you can restore a data backup
you have made with
LX Backup . This provides you with the data status at the time of the backup
again within just a few minutes.
As LX Backup backs up and restores the entire RAM memory of your device, the registry, which
contains the configuration data of your device and any programs installed in the RAM memory, is
also backed up.
Before you start a backup, make sure that sufficient memory space is available on the memory card
or in the device, and that the battery holds a sufficient charge. If the battery charge is low, connect
the power adapter or charge the battery.
! When you conduct a backup, you may not carry out any other operating procedure before
the backup has been completed. Do not press any keys, touch the display or remove a
memory card.
Backup
The RAM memory content is saved to a memory card.
Ê Select Start - Programs - LX Backup .
When the program LX Backup appears on the screen, select the memory card on which the backup
is to be made. Select either Memory Card or Memory Card 2 as the target for the backup.
i
Pocket LOOX 600 always assigns the name Memory Card to the first memory card
inserted in the device. The second card inserted is assigned the name Memory Card 2 .
Ê Press the Backup button.
Ê A message is output when the backup has been completed.
Ê When you press the OK button on the navigation bar, the screen of LX Backup appears again
on the display.