Fujitsu Siemens Computers Pocket LOOX 600 - Manual (Page 65)

Troubleshooting and tips
A26391-K120-Z120-1-7619 57
The Pocket PC stops working
If the Pocket PC stops working, this may have the following reasons:
An application programme has caused the malfunction
Ê Restart the Pocket PC (soft reset).
Or
Ê Reset the Pocket PC to the delivered state with the General Reset switch.
!
When you reset the Pocket PC to the delivered state, your data are lost!
1
2
Ê Slide the cover all the way to the right with
the stylus (1) so that the General Reset
switch is accessible.
Ê Press the General Reset switch to the
left (2) with the stylus: your Pocket PC is
switched off.
2
3
Ê Slide the General Reset switch after a short
waiting time to the right (2): your Pocket PC
will start up after a few seconds.
i
After approximately 10 seconds a picture appears on the display and a tone sounds.