Fujitsu Siemens Computers Pocket LOOX 600 - Manual (Page 44)

FSC SpeedMenu – Operating Pocket LOOX 600 quickly with one hand
36 A26391-K120-Z120-1-7619
Operating with the stylus
·
To trigger the desired action (activate the entry, select the submenu, display help, terminate
the programme): Press the corresponding menu entry or the corresponding button briefly.
·
Return to a higher-level menu from a submenu: press the Back arrow button located in the
navigation bar of the menu.
·
To activate the pop-up menu: Press the desired entry a little bit longer. You can edit the menu
structure in the pop-up menu. Details are contained in the section "Editing FSC SpeedMenu".
Programme structure
The menu comprises two sections, which are either separated by a separating bar or by the arrow
button.
FSC SpeedMenu default entries in Main and
Quick menu. Separation of areas with bars *
Main menu
·
In the main menu you administer the
documents and programmes which you
often use into folders and subfolders.
·
You can create up to 20 main entries and
subentries.
·
The menu title bar indicates which
submenu is currently open.
·
If there is not enough space for all of the
entries on the display, move the section
displayed. Touch the desired arrow
button with the stylus to scroll. To scroll
quickly to the top or bottom entry in the
Main menu, leave the stylus on the
respective arrow button for a moment.
Quick menu
·
The quick menu is meant for your
favourite programmes and documents i.e.
the ones you use often.
·
Your entries in the quick menu are always
visible and can therefore be called at any
time regardless of which submenu is
activated in the main menu.
You can create up to five entries.